ECP Parallel
ECP = Extended Capabilities Port
(at the PC)
25 PIN D-SUB FEMALE at the PC.
Pin | Name | Dir | Description |
---|
1 | nStrobe | | Strobe |
2 | data0 | | Address, Data or RLE Data Bit 0 |
3 | data1 | | Address, Data or RLE Data Bit 1 |
4 | data2 | | Address, Data or RLE Data Bit 2 |
5 | data3 | | Address, Data or RLE Data Bit 3 |
6 | data4 | | Address, Data or RLE Data Bit 4 |
7 | data5 | | Address, Data or RLE Data Bit 5 |
8 | data6 | | Address, Data or RLE Data Bit 6 |
9 | data7 | | Address, Data or RLE Data Bit 7 |
10 | /nAck | | Acknowledge |
11 | Busy | | Busy |
12 | PError | | Paper End |
13 | Select | | Select |
14 | /nAutoFd | | Autofeed |
15 | /nFault | | Error |
16 | /nInit | | Initialize |
17 | /nSelectIn | | Select In |
18 | GND | | Signal Ground |
19 | GND | | Signal Ground |
20 | GND | | Signal Ground |
21 | GND | | Signal Ground |
22 | GND | | Signal Ground |
23 | GND | | Signal Ground |
24 | GND | | Signal Ground |
25 | GND | | Signal Ground |
Note: Direction is Computer relative Device.
Contributor: Joakim Ögren, Marco Furter
Source:
Microsoft MSDN Library: Extended Capabilities Port Specs
Info: Microsoft MSDN Library
Copyright © The Hardware Book Team 1996-2001.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2001-06-07